Socket Diameter Chart

May 25, 2024 Post a Comment

Socket diameter chart

<table><tbody><tr class="ztXv9"><th style="padding-left:0">3/8″ Drive</th><th>1/4″ Drive</th><th>1/2″ Drive</th></tr><tr><td style="padding-left:0">6mm</td><td>4.5mm</td><td>9mm</td></tr><tr><td style="padding-left:0">7mm</td><td>5mm</td><td>10mm</td></tr><tr><td style="padding-left:0">8mm</td><td>5.5mm</td><td>11mm</td></tr><tr><td style="padding-left:0">9mm</td><td>6mm</td><td>12mm</td></tr></tbody></table>

Are sockets measured in diameter?

Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets. Metric sockets: Ideal for working on imported vehicles, metric sockets' sizes are measured in millimeters.

What is a socket diameter?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

How can you tell the size of a socket?

How to Determine the Right Size Socket for a Nut

Turn on the digital caliper and set it to read in inches, not millimeters.
Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
Check the caliper display. ...
Turn on the digital caliper and set it to read in millimeters, not inches.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

What are the 3 common sizes of ratchets?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there's little room to move the handle.

What are the 3 types of sockets?

Three types of sockets are supported:

Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries.
Datagram sockets allow processes to use UDP to communicate. ...
Raw sockets provide access to ICMP.

What is a 3/8 socket in MM?

SAE	Metric	Inch
3/8"		0.375
	10mm	0.394
13/32"		0.406
	11mm	0.433

What is a 10mm socket in standard?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What are different types of sockets?

Quick Check

Common Types of Socket and Their Uses.
Hex Sockets.
Spark Plug Sockets.
Impact Sockets.
Universal Joints Sockets.
Insulated Sockets.
Socket Bits.
Pass-Through Sockets.

How are 12 sockets measured?

Socket Sizes:SAE (INCH, fraction) & Metric (mm) In the current market, socket sizes are divided into two systems: SAE (imperial, measured in inches) and metric (measured in millimeters). Both 6-point and 12-point sockets are measured using these two systems.

What are the standard SAE socket sizes?

The most commonly used and sold SAE sizes for wrenches and sockets are:

5/16″
3/8″
7/16″
1/2″
9/16″
5/8″
11/16″
3/4″

How do you measure nut size?

The measurement of an inch nut or bolt will be listed as the thread size — a number between one and 12 or an inch increment followed by the threads per inch (TPI). If the diameter is less than 1/4 inch, the diameter will be listed as a number between zero and 12; the larger the number, the closer it is to 1/4 inch.

How do you measure bolt socket size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What size is a 7/8 socket in metric?

Bolt Diameter	Metric	Standard
1/2"	19mm	3/4"
9/16"	21mm	13/16"
	22mm	7/8"
5/8"	24mm	15/16"

Can I use a 3/4 socket instead of a 19mm?

No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

What's equivalent to a 19 mm socket?

Two sizes in the auto repair range are almost identical. 19mm is 3/4 inch.

What size nut fits a 19mm socket?

M12 wheel nut cap to fit over a wheel stud or nut with a 19mm socket size. Usually an M12 stud or nut.

What are 1/4 ratchets used for?

A 1/4-inch ratchet is best for smaller sockets and precision work. The most versatile ratchet is the 3/8-inch size. This ratchet size can accommodate sockets of all sizes. It is big enough to apply a lot of force, but it can still fit into tight spaces.

What is the most common ratchet size?

The most common ratchet sizes are ¼ inch drive, 3/8 inch drive, and ½ inch drive. There are also larger ratchet sizes including ¾ inch drive and 1-inch drive available. Most ratchets used with sockets contain a gear mechanism that is designed to allow for rotation in one direction only.