Screwdriver Tip Names

September 19, 2024 Post a Comment

Screwdriver tip names

Drive Tip or Bit These are designed for use with multi-bit tools. The tip may also be known as the screwdriver head.

What are the different types of screwdriver tips?

Types of Screwdriver Heads

Phillips Head. AKA: Cross head screwdriver. If you only own one screwdriver, this is the one you want.
Flat Head. AKA: Straight head, flat blade, slotted screwdriver. ...
Allen Wrench. AKA: Hex key, Allen key, hex screwdriver, Ikea wrench.

What are the 4 types of screwdrivers?

4 Types of Screwdrivers Every DIYer Should Own

Flat Type Screwdrivers.
Phillips (PH) Type Screwdrivers. ...
Pozidriv (PZ) Type Screwdrivers. ...
Torx Tamper-Proof (TPX) Type Screwdrivers. ...
Teng Tools Screwdrivers.

What are the parts of a screwdriver called?

The screwdriver consists of four parts: 1) The handle, 2) the shank, 3) the blade, and 4) the tip.

What is a 3 pronged screwdriver called?

A tri-point screwdriver is similar to a Phillips screwdriver, but it only has three points rather than four.

What are the blades on a screw called?

The blade is the located on the tip of the shank, and is the part that fits into a particular screw. Two of the most well known types of screwdriver blades are the flat-head and the Phillips head. As the name suggests, a flat-head blade is a straight, even blade.

What are the 6 different types of screw heads?

6 Common Types of Screw Drives

#1) Phillips-Head. Arguably, the most common type of screw drive is Phillips head.
#2) Flat-Head. Also known as a slot drive, a flat-head screw lives up to its namesake by supporting the use of a flat-head screwdriver. ...
#3) Hex. ...
#4) Torx. ...
#5) Double Hex. ...
#6) Robertson.

How many different types of screwdriver heads are there?

6 Types of Screwdrivers – Everyone Must Know.

What are screw tips?

At the very end of the screw is its tip; this is the part that penetrates the material first when the screw is being driven in. There are many different styles of tip, depending on how you want the screw to be inserted into the material.

What are the 4 components of a screw?

A screw has four main parts: a head, a shank, the threads, and the point of the screw. The head fits the driver and holds the screw in place. It also provides a contra for the force of the screw on the outer surface of the substrate you are screwing into.

What are the different parts of a screw called?

The three basic parts of a screw are the head, threaded shank and point. There are different types of each, so it's important to know what works best for your particular job.

What is screwdriver shank?

A screwdriver's shank is the thin rod of metal between the handle and the head. On most screwdrivers, it's a very straightforward piece of metal.

What is a 6 point screwdriver called?

Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits.

What is a 6 point star screwdriver called?

Torx. The hexalobular socket screw drive, often referred to by the original proprietary brand name Torx ( /ˈtɔːrks/) or by the alternative generic name star drive, uses a star-shaped recess in the fastener with six rounded points.

What are the different types of screw heads?

What Are the Different Types of Screw Heads?

Countersunk Screw Head Styles.
Non-Countersunk Screw Head Styles. ...
Different Driving Recesses. ...
Slotted. ...
Phillips. ...
Phillips Tamper-Resistant. ...
Combination. ...
Hex External.

What do you call screws with pointed ends?

Self Drilling and Self Piercing Screw Points Self-piercing: Self-piercing screws are similar to self-drilling screws, except they have a pointed tip that allows them to quickly pierce through sheet metal without sacrificing any stability. They are also called needle point, speed point and spring point screws.

What are flat tip screws called?

Hex Bolts. Hex bolts have a flat hexagonal head and threads to be used with a nut or tapped hole. What they're used for: fastening wood to wood or metal to wood.

What is the edge of a screw called?

The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.

What is the 8 point screw head called?

An "8 point star" socket head screw is actually a double square head screw.

What are the five most common screwdriver types?

The five most common drive profiles are slotted, Phillips, Pozidriv, TORX® and hexagon. Slotted drives feature a simple slot as a host for the blade, however, they have a disadvantage of a lack of centring – making it easy for the tool to slip out of the screw.