What Are Pliers Used For

September 18, 2024 Post a Comment

What are pliers used for

Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe.

What should pliers not be used for?

Pliers are often misused as general-purpose tools. Their use should be limited to operations for which they were designed: gripping and cutting (never for loosening or tightening nuts). Always use wrenches on nuts and bolt heads, never use a pliers. In fact, don't use pliers when any other tool will do.

Which tool is used to cut wires?

Diagonal pliers (also known as wire cutters, diagonal cutting pliers, diagonal cutters, side cutters, dikes or Nippy cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).

How do you use cutting pliers?

How to use diagonal cutting pliers

Step 1 – Open jaws. Open the jaws of the diagonal cutting pliers by moving the handles apart.
Step 2 – Place object between jaws. ...
Step 3 – Squeeze handles together. ...
Step 4 – Troubleshooting.

What are the two important rules for using pliers?

Basic safety rules which apply to the use of pliers.

Pliers should not be used for cutting hardened wire unless specifically manufactured for this purpose.
Never expose pliers to excessive heat.
Always cut at right angles. ...
Don't bend stiff wire with light pliers.

Can I use pliers instead of a wrench?

Do not use the wrong tools for the job. Never use pliers instead of a wrench or a wrench as a hammer.

Can you hurt yourself with pliers?

According to U.S. Consumer Product Safety Commission data, most plier-related injuries involve lacerations to the hands and fingers. The following presents information about safe use of pliers. use pliers for tasks that require the use of a hammer or a wrench.

Can you cut wire with pliers?

With the right tools and cutting technique, you can cut any wire. Use diagonal cutting pliers to cut any kind of wire. If you have a choice of tools, use lineman's pliers to cut or splice electrical wire, and long-nose pliers for small-gauged wire.

How do you cut wire without pliers?

It's possible to use a hacksaw to cut wire if no cutter is available. You'll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.

What is a long-nose pliers used for?

Needle-nose pliers, also known as long-nose pliers and snipe-nose pliers, are both cutting and holding pliers used by artisans, jewellery designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire.

What pliers can cut nails?

End cutting pliers are used for lots of different tasks, including: Cutting nails in wood is a primary application of end cutters, ideal if you're reusing a piece of wood from an old project.

Do pliers cut?

Diagonal pliers work better for cutting large things, like cutting a wire in half so both ends may be worked on individually. Needle nose pliers are likely the best known variety of cutting pliers.

Which pliers are used to get into tight places?

The needle nose pliers are well suited for working in tight places and grabbing objects. They also generally have an area that is used to cut wire. The diagonal cutters are used for cutting material generally wire.

When using pliers you should always?

Safety 101: How to Use Pliers

Always protect your eyes!
Only use pliers for their intended job. ...
Use the correct pliers for the job at hand. ...
Never force pliers. ...
Don't expose your pliers to excessive heat. ...
Only cut with designated cutting pliers and only at right angles to the wire.

What type of pliers are used to cut wires?

End-cutting pliers - also known as nippers, are used to cut nails, wires, rivets, and bolts. Due to the almost flat head design, the user can get flush with the surface to cut the object, without digging into it.

What is the safety practice of pliers?

Never use pliers to remove (turn) nuts or bolts. It is a good safety practice to wear eye protection if there is the possibility of generating flying particles or pieces of wire when using pliers. Assure cutting edges of pliers are sharp and jaw teeth are clean and unworn.

What pliers do plumbers use?

Needle-nose and tongue-in-groove pliers, for instance, are the most common among plumbers' tools. Needle-nose pliers are handy because their narrow, pointed form can access hard-to-reach places. Tongue-in-groove pliers adjust to fit nearly any object. You can slide its jaw and lock it in place.

What to use when you don't have a wrench?

If you don't have a wrench at all, turn to the original “in a pinch” tool—duct tape. Wrap a long strip of tape counterclockwise around the nut or bolt head. Leave a 6- or 8-inch tail as a handle to pull. The tape should be strong enough to loosen the nut.

What are locking pliers called?

Locking pliers (also called Vise-Grips, a vice grip, Mole wrench or mole grips) are pliers that can be locked into position, using an "over-center" cam action. Locking pliers are available with many different jaw styles, such as needle-nose pliers, wrenches, clamps and various shapes to fix metal parts for welding.

What is the difference between pliers and cutters?

Pliers Components The tip of the jaw (nose) can be flat (combination pliers), half round (long nose) and round (electronics pliers), and provide functionalities such as bending, gripping, and holding various objects. Cutter is designed to cut nails, bolts, wire of different thicknesses and other materials.